Operating-cycle fuel, gas and electrical energy consumption test system
Overview
Working condition fuel consumption/gas consumption/electrical energy consumption test system is composed of test record host, driver's multi-parameter display, hand operator, etc. It is mainly used for four-stage fuel consumption of vehicles at constant speed, acceleration 50-70, acceleration 60-80, and idling 300 /Gas consumption measurement, which meets the new standards of the Ministry of Communications, is easy to operate and efficient in testing. It is especially suitable for measurement occasions in the proving ground.
●Test items
- Constant speed/acceleration/idling fuel consumption test: JTT711-2016, JTT719-2016
- Constant velocity/acceleration/idling gas consumption test: JT/T 1411-2022, Fuel Consumption Limits and Measurement Methods for Natural Gas Commercial Goods Vehicles, and JT/T 1444-2022, Fuel Consumption Limits and Measurement Methods for Natural Gas Commercial Passenger Vehicles
●Measurement parameters
- Vehicle speed, time, distance, fuel consumption/gas consumption
●Main Features
- Working conditions fuel consumption/gas consumption/electrical energy consumption test system is easy to operate, one-key operation of the handheld operator
- The start and end of the test are automatically triggered, with a voice prompt function
- Working condition fuel consumption/gas consumption/electrical energy consumption test system built-in printer, with test data online/offline printing function
- The condition trigger vehicle speed is automatically corrected to the standard trigger vehicle speed
- The conditional trigger distance is automatically corrected to the standard distance
- There are three modes: touch screen operation, physical button operation, and remote operation by hand operator
Technical specifications
Swipe horizontally to view all table columns.
Operating-cycle fuel consumption / Gas consumption / Electrical energy consumption test system specifications
| Vehicle speed | 20Hz GPS, speed measurement range 0-400km/h, speed measurement accuracy : ±0.1km/h, resolution 0.01 km/h |
| Time | range : unlimited , accuracy : ±0.01s |
| Distance | range : unlimited ; accuracy : ±0.05% (＜50cm/km); resolution : 4mm |
| Fuel consumption | Range: 0.3～250L/h; accuracy: ±0.5% |
| Gas consumption | Range: 0～350kg/h; accuracy: ±0.35% |
| Power supply | 24VDC (7～36V wide voltage), power consumption about 20W, with power supply reverse protection |
| Recording cycle | 10ms-50s can be set |
| Maximum length of single data file | 2GB |
| Storage medium | High-speed U disk, capacity 8-32GB |
| Driver multi-parameter display | High contrast 5-inch LCD screen |
| Host high-brightness colour touch display | 5.0 inches , resolution 800x480, clock frequency 1G |
| Display | displays vehicle speed , Distance , time and fuel consumption values |
System configuration
- Fuel consumption/gas consumption/electrical energy consumption test system configuration under working conditions
●Test recorder: (), 1
●Fuel consumption meter/gas consumption meter: (), 1
●Driver multi-parameter display: , 1
●Accessories: oil pipes, power cords, signal wires, installation tools, manuals, etc.
Test software
Main interface of gas consumption test
parameter settings
Test data view
File management interface
Applications
Operating-cycle fuel, gas and electrical energy consumption test system applications.
Operating-cycle energy consumption test applications
Operating-cycle energy consumption test applications
Operating-cycle energy consumption test applications
Need selection advice or a quotation?
Submit your test items and vehicle type. The sales representative for your region will call you back.