Tyre pressure monitoring system
Overview
This system adjusts and monitors tyre pressure during vehicle TPMS testing. Its functions, range and accuracy meet the requirements of Performance Requirements and Test Methods for Passenger Car Tyre Pressure Monitoring Systems, Annex B of JT/T 1178.2-2019, and JT/T 1429-2022, Technical Requirements and Test Methods for Tyre Pressure Monitoring Systems of Commercial Vehicles.
Supported tests
- Tests under Performance Requirements and Test Methods for Passenger Car Tyre Pressure Monitoring Systems.
- Single-tyre under-inflation alarm tests (5.2.3) and multiple-tyre under-inflation alarm tests (5.2.4) under JT/T 1429-2022.
- Tyre under-inflation alarm tests (Annex B1.3) and over-inflation alarm tests (Annex B1.4) under JT/T 1178.2-2019, Safety Technical Specifications for Commercial Goods Vehicles — Part 2: Towing Vehicles and Trailers.
Technical specifications
Swipe horizontally to view all table columns.
Tyre pressure monitoring system specifications
vehicle speed and time
| Vehicle speed measurement range | 0.3~400km/h |
| Vehicle speed measurement accuracy | ±0.1km/h |
| Time measurement range | 0-800s |
| Time measurement accuracy | ±0.01s |
Measurement and control unit
| Target pressure | 100~300kPa adjustable |
| Fine pressure adjustment range | 1~3kPa |
| Pressure sensor range | 0~1MPa |
| Pressure sensor accuracy | ±3kPa |
| Wireless module | built-in slave wireless data module , configurable channels |
wireless data module
| Baseband frequency | 2.4GHz |
| Communication distance | radius 50m |
| Communication interface | 1 channel RS232, default baud rate 115200 ( selectable 57600,38400, 19200, 9600,4800,2400); 1 channel CAN, communication rate 125K, 250K, 500K, 1M adjustable ; Antenna connector : SMA; |
| Display method | 0.91 inch OLED |
| Status indicators | 3 units LED ( power supply , data transmission , data reception ) |
Driver multi-parameter display
| Display screen | high contrast , high brightness , 5 inches , resolution : 800x480 pixels |
| Installation method | imported suction-cup mount |
| Equipment power supply | 12VDC (9-36V wide input voltage ) |
System configuration
Swipe horizontally to view all table columns.
| Test host | One host |
|---|---|
| Remote tyre-pressure units | Four units |
| Host radio module | Wireless communication |
| Wheel adapters | Four sets |
| Driver display | Multi-parameter display |
| Digital tyre air pump | Inflation equipment |
Test software
Test settings
Sensor calibration
Applications
Tyre pressure monitoring test application: scene 1 and scene 2.
Tyre pressure monitoring test applications 1
Tyre pressure monitoring test applications 2
Need selection advice or a quotation?
Submit your test items and vehicle type. The sales representative for your region will call you back.